English | 日本語 | Deutsch | Español | Русский | Français | بالعربية
Select Currency Dropdown Arrow
Velg språk Dropdown Arrow
Home>mall>Electronics
0Likt

DC 9V SMT Soldering Test Kit Electronic Practice Set

4.1
★★★★★
48
$8.99 /$10.97
  • Direct purchase from the factory

    • *Name:

    • *Email:

    • *Phone:

    • *Quantity:

    • *Content:

    • Attachment:

      Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

    $4.99 /$10.97
    -+

    Sikker betaling

    Gratis gave
    Gratis gave ved kjøp
    Leveringspolitikk
    Gratis frakt på bestillinger over $9.9
    Returpolitikk
    Returer aksepteres innen 40 dager fra mottaksdato. Tilpassede varer kan ikke returneres. Varer kjøpt med gavekort kan bare byttes.

    Gratis Gave

    Velkommen til Roymall, din profesjonelle netbutikk for premium gaver. Vi setter stor pris på din støtte, og som takk tilbyr vi en gratis gave med hvert kjøp. Klar til å utforske vårt utvalg? Bla gjennom våre produkter, legg inn din bestilling, og se frem til å motta din gratis gave sammen med kjøpet.

    Leveringspolitikk

    Vi behandler bestillinger innen 2 dager. Bestillinger lagt inn i helger eller helligdager vil bli behandlet de følgende virkedagene.Normal leveringstid er 5-7 virkedager.Leveringstid kan variere avhengig av destinasjon.

    1. Returpolitikk

    Vi godtar kun returer på varer kjøpt direkte fra roymall.com. Gratis gaver kan ikke returneres. Varen må være ubrukt og i original emballasje.Returer behandles innen 3-5 virkedager etter mottak.Tilpassede varer kan ikke returneres.Kontakt oss: service@roymall.com eller Whatsapp: +8619359849471

    2.Refusjonspolitikk

    Full refusjon gis etter mottak og kontroll av returvaren. Fraktgebyrer refunderes ikke.Kontakt oss ved spørsmål: service@roymall.com eller Whatsapp: +8619359849471
    {"code":"00","result":"
    Description:

    1. J1 and J2 are the power supply input terminals of the entire SMT board. It can work normally when connected to AC6V or DC9V. When working normally, all LED lights in this kit can work normally. At first, each group of LEDs flashes with water, and then flashes at intervals, and finally all Light up all the LEDs, then flash again, and cycle like this to check whether the LEDs are working and whether they are soldered well. If it is found that the corresponding LED does not flicker, it means that there is a welding error or a false welding.
    2. The AC6V power supply is rectified by D1-D4 diodes, and then through each filter capacitor to pin 1 of the voltage regulator chip 78M05 (LED97 is always on, the rectifier circuit is working normally), and the output of DC5V is supplied to the whole test circuit through pin 3.
    3. This test circuit is controlled by a single-chip microcomputer to work with 12 groups of 8-bit LED lights. Each group is composed of 1 74HC573 and 74HC164. One group can control 8 LEDs, 12 groups in total. Figure 1 is the control schematic diagram of one group. When working normally, all LED lights are on and can flash.


    Specifications:

    Product Name: SMD Soldering Test Kit
    PCB material: FR-4PCB board
    PCB size: 145*100MM
    patch tape connection test
    Power supply mode: DC DC9V
    Applicable objects: junior welding patch personnel
    Component Description: Common patch components are used


    Products related to this item
    Loading related products...
    ❮
    ❯
    Electronics Ranking
    More Electronics
    Description:

    1. J1 and J2 are the power supply input terminals of the entire SMT board. It can work normally when connected to AC6V or DC9V. When working normally, all LED lights in this kit can work normally. At first, each group of LEDs flashes with water, and then flashes at intervals, and finally all Light up all the LEDs, then flash again, and cycle like this to check whether the LEDs are working and whether they are soldered well. If it is found that the corresponding LED does not flicker, it means that there is a welding error or a false welding.n
    2. The AC6V power supply is rectified by D1-D4 diodes, and then through each filter capacitor to pin 1 of the voltage regulator chip 78M05 (LED97 is always on, the rectifier circuit is working normally), and the output of DC5V is supplied to the whole test circuit through pin 3.n
    3. This test circuit is controlled by a single-chip microcomputer to work with 12 groups of 8-bit LED lights. Each group is composed of 1 74HC573 and 74HC164. One group can control 8 LEDs, 12 groups in total. Figure 1 is the control schematic diagram of one group. When working normally, all LED lights are on and can flash.


    Specifications:

    Product Name: SMD Soldering Test Kit
    PCB material: FR-4PCB board
    PCB size: 145*100MM
    patch tape connection test
    Power supply mode: DC DC9V
    Applicable objects: junior welding patch personnel
    Component Description: Common patch components are used