HGLRC Draknight 2 Inch 2S Toothpick RC FPV Racing Drone Entry-level RTF with Remote Controller FPV Goggles for Beginners
Direct purchase from the factory 
Sikker betaling
Gratis gave
Leveringspolitikk
ReturpolitikkGratis Gave
Velkommen til Roymall, din profesjonelle netbutikk for premium gaver. Vi setter stor pris på din støtte, og som takk tilbyr vi en gratis gave med hvert kjøp. Klar til å utforske vårt utvalg? Bla gjennom våre produkter, legg inn din bestilling, og se frem til å motta din gratis gave sammen med kjøpet.Leveringspolitikk
Vi behandler bestillinger innen 2 dager. Bestillinger lagt inn i helger eller helligdager vil bli behandlet de følgende virkedagene.Normal leveringstid er 5-7 virkedager.Leveringstid kan variere avhengig av destinasjon.1. Returpolitikk
Vi godtar kun returer på varer kjøpt direkte fra roymall.com. Gratis gaver kan ikke returneres. Varen må være ubrukt og i original emballasje.Returer behandles innen 3-5 virkedager etter mottak.Tilpassede varer kan ikke returneres.Kontakt oss: service@roymall.com eller Whatsapp: +86193598494712.Refusjonspolitikk
Full refusjon gis etter mottak og kontroll av returvaren. Fraktgebyrer refunderes ikke.Kontakt oss ved spørsmål: service@roymall.com eller Whatsapp: +86193598494711. Lightweight and compact design for easy handling and maneuverability.
2. Powerful motor for superior performance and fast speed.
3. Integrated flight controller for precise and stable flight control.
4. FPV camera for real-time video transmission and immersive flying experience.
5. Long flight time for extended play and enjoyment.
Specifications:
Brand: HGLRC
Model: Draknight
Version: RTF
| Draknight Drone | Frame: Draknight frame Flight controller: SPECTER12 ES2-4S AIO MCU: STM32F411 GYRO: ICM42688P Built-in receiver: UART ExpressLRS 2.4G Built-in VTX: 0-25-100-400mW(adjustable) Continuous current:12A Peak current: 15A(55) ESC protocol:Dshot150/300/600 ESC firmware:/(Bluejay) Flight control firmware: HGLRCF411SX1280_15A Flight controlinput voltage: 25-45 (Lipo) Mounting hole:25.5X25.5mm.M2 Motor:SPECTER 1003 10000kv motor Propeller:Gemfan2023 propeller ELRS version weight: 44.3g |
| C1 Remote Controller | Built-in ELRS: ELRS 2.4GHZ Built-in ELRS refresh rate: 250Hz Remote control sensor type: potentiometer sensor Antenna: built-in ipex1 generation copper tube antenna Working voltage: 6-8.4v DC Remote control distance: greater than 500m Output interface: TX module NANO bin (crsf protocol) TYPE-C(only charging and firmware flashing) 3.5MM analog trainer port Battery: 18650 flat head battery u00d72 (need to be installed by yourself) Charging: TYPE-C charging current 1.2A The charging time is about 3-4 hours Remote control channel: 8 channels Bluetooth: Bluetooth 4.2 ELRS firmware upgrade method:WIFI or TYPEC wire brush ELRS firmware version: ELRS 3.0 ELRS firmware name: DIY devices 2.4 GHz DIY ESP32+E28 2.4GHz TX |
| FPV Goggles | VR100 5.8GHz Analog FPV Goggles |
| Wireless Dongle Module | Built-in ELRS Maximum supported frequency: 250hz Receiving distance: more than 200m Binding method:Quickly power on and off three times to enter binding mode Interface: USB TYPE-C+USB TYPE-A double plug Working voltage: 5V ELRS firmware upgrade method:WIFI or USB plug ELRS firmware version: ELRS 3.0 ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Hermes2.4GHz RX External receiver support protocol: only supports CRSF protocol Weight: 9.5g Size: 74mmu00d721mmx12.5mm |
Package Included:
1x Packing Bag
1x Draknight drone
1x VR100 5.8GHZ FPV Goggles
1x C1 Remote Controller
1x C3 Charger
1x C3 Charger Power Cord
1x Wireless Dongle Module
1x 915 fpc antenna
1x Propeller extractor
8x Propeller
1x M2 hexagonal L wrench
1x 82mm Phillips 1.5 screwdriver
1x Micro data cable
1x typec charging cable
1x Goggles 3.5mm conversion cable
2x 2S 720mAh battery
1x C3 charger manual
1x Sticker
1x Draknight RTF Instructions
1x Card
